Model P25 • Capacitance Probe, High Temperature and Pressure Service, Tubular Ground Features For high temperature and high pressure services High inherent gain sensitivity Allows full scale calibration over a modest change and narrow ranges Works with liquids carrying entrained solids low dielectric constant Insensitive to surface turbulence Built-in ground reference improves sensitivity Linear output signal in irregular tanks Allows calibration to be done outside the vessel Resists flowing currents, waves and vortices Description The Delta Controls Model P25 Capacitance Probe is intended for high temperature and pressure chemical processing as well as steam and slurry applications. It also greatly resistants corrosion and is equipped with triple sealing for utmost safety and reliability. The P25 is fitted with a wrap-around tubular ground reference which allows full scale range calibration over just a few inches of conductive liquid. The ground tube is relatively large and provides an open bore. It can be used when the liquid is highly turbulent or carries entrained solids. The open bore also allows fast response speed and resists plugging. The tubular ground reference sheath produces a linear output signal when used in horizontal cylinders or other tanks with nonlinear sidewalls. The electronic module/probe combo can be calibrated outside the vessel for convenience, safety, and without varying the process liquid level. Specifications Working Pressure: Working Temperature: Insertion Length: Process Connection: Threaded: Flange: Flange Rating: Available Wetted Materials: Ground Sheath: Model P25 ≤ +650 psig (+44.8 bar) ≤ +750 °F (+399 °C) ≤ 10 ft (3 m) 2.0 MPT minimum 2.0 in ≥ 2.0 in ≤ 600 lb 316 Stainless Steel, PTFE, carbon steel 316 Stainless Steel (other materials available) 60 | Capacitance > Model P25 | deltacnt.com