LINEAR LOW DENSITY POLYETHYLENE (LLDPE) Westlake linear low density polyethylene (LLDPE) film resins meet the demanding needs of food packaging, consumer and industrial packaging, and non-food packaging. Our broad selection of butene and hexene copolymer products includes products with the high-performance properties that you require for your demanding film applications. HIFOR® Grade LF1010AA LF2018AB LF2010AA LF2010DD LF2020AA LF2020AC LF2020AD LF2020BB LF2020DD LT74104 LT74105 LT74113 LT74147 LT74151 LF1020AA LF1020AD LF1020CC LF1020DC LF1020DD LF2041AA LF1040AA LF1040CC LF1030AA LF2051AA LF1050AA LF1050CC LLDPE MI (g/10 min) 0.8 0.8 0.85 0.85 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.1 1.1 1.1 1.1 1.1 2.0 2.0 2.0 2.6 3.5 3.5 3.5 Density (g/cm3 ) 0.922 0.924 0.9255 0.9255 0.919 0.919 0.919 0.919 0.919 0.920 0.920 0.920 0.920 0.920 0.919 0.919 0.919 0.919 0.919 0.918 0.919 0.919 0.919 0.918 0.925 0.925 Slip (PPM) 0 0 0 1,500 0 0 0 700 1,500 0 1,200 1,200 1,500 0 0 1,000 1,500 1,500 0 0 1,000 0 0 0 1,000 AB (PPM) 0 PPA Y 4,000 N 0 Y 7,500 Y 0 N 5,500 N 7,500 N 4,000 N 7,500 N 0 N 3,500 N 3,500 N 6,500 N 7,500 N 0 N 7,500 N 5,500 N 5,500 N 7,500 N 0 N 0 N 5,500 N 0 N 0 N 0 N 5,500 N Grade HIFOR Xtreme® MI SC74844 SC74853 SC74858 (g/10 min) 0.5 0.5 0.5 SC74849 0.55 SC74836 SC74859 0.6 0.6 SC74875 0.75 SC74869 0.85 SC74883 1.0 Density (g/cm3 0.917 0.917 0.917 0.925 0.926 0.926 0.915 0.918 0.917 LLDPE ) Slip (PPM) AB (PPM) 1,200 6,500 Y 0 0 0 0 0 0 6,500 Y 0 0 0 Y Y Y 7,500 Y 0 Y 500 10,000 Y 0 0 N PPA MXSTEN® Grade CV77519 CV77541 CV77523b CV77526 CV77540 CV77516 CV77528 Notes: b MI (g/10 min) 0.5 0.5 0.5 0.7 0.8 1.0 2.0 Plastomers ) Density (g/cm3 0.906 0.906 0.906 0.910 0.906 0.910 0.910 PPA Y Y Y N Y N N CV77523 has a Slip of 1,150 and AB of 18,000. Westlake’s patented ENERGX® MXSTEN® Grade HIFOR Clear® MI SC74580 SC74558 (g/10 min) 0.6 1.0 Density (g/cm3 0.926 0.920 LLDPE ) technology makes plastomers the lowest density gas-phase hexene-based linear low density polyethylene available. Slip (PPM) 0 400 AB (PPM) 0 0 PPA Y N MXSTEN® plastomers meet FDA requirements for food contact and are a preferred resin for flexible food packaging. Their excellent seal strength at low initiation temperatures allows faster line speeds on form, fill and seal machines. MXSTEN® plastomers offer a unique balance of stiffness and toughness as well as good processability. Other applications include modification of engineering resins, TPO compounding and high-filler compounded materials.
