GTC-151 FTS SCRAPER TOOL BFN-152 BFN-152S BFN-152X TUBE SIZES Standard Boiler O.D. Size Approximate Boiler I.D. Size 1 3/8” 1 1/4” 1 5/8” 1 1/2” 2” 1 3/4”-1 7/8” 2 1/2” 2 1/4”-2 3/8 3” 2 3/4”-2 7/8” 3 1/2” 3 1/4” 4” 3 3/4” A B C MUST HAVE SAM-3 ACCESSORIES A. STEEL BRUSHES Steel brushes are recommended for removing soot and light scale deposits. GTC-151: Steel brushes for tubes 1 3/8”, 1 5/8”, 2”, 2 1/2”, 3”, 3 1/2” or 4” O.D. ...........................................................$23.50 B. FTS SCRAPER TOOLS FTS Scraper Tools are medium action, spring-loaded tools. They are used for removing light scale deposits in boiler firetubes when steel brushes do not remove all deposits. Ferrule extension required. FTS-200: Scraper Tool for tubes 2” O.D. ....................$83.00 FTS-250: Scraper Tool for tubes 2 1/2” O.D. .............$83.00 FTS-300: Scraper Tool for tubes 3” O.D. .................$133.00 FERRULE EXTENSIONS Scraper tools require ferrule extensions. Select the ferrule extension to match the bayonet nozzle in use. FE-375: Ferrule Extension for scraper tools when using BFN-152 Short Bayonet Nozzles .................$42.00 FE-2100: Ferrule Extension for scraper tools when using BFN-152S or BFN-152SA Straight Bayonet Nozzles ..$121.00 Note: Scraper tools cannot be used with BFN-152X or BFN-152XA Offset Bayonet Nozzles. CARRYING CASE SC-682: Carrying case for SAM-3 Boiler Firetube Punching Machine and accessories .............................. $605.00 C. STANDARD BAYONET NOZZLES BFN-152: Short Bayonet Nozzle, 3 1/2” long for tubes 1 3/8”, 1 5/8”, 2”, 2 1/2”, 3” or 3 1/2” O.D. ...............................$156.00 BFN-152S: Straight Bayonet Nozzle, 18” long for tubes 1 3/8”, 1 5/8”, 2”, 2 1/2”, 3” or 3 1/2” O.D. ..................$137.00 BFN-152SA: Straight Bayonet Nozzle, 18” long with ferrule extension for tubes 4” O.D. ...........................................$485.00 BFN-152X*: Offset Bayonet Nozzle, 18” long for tubes 1 3/8”, 1 5/8”, 2”, 2 1/2”, 3” O.D. ......................................$156.50 BFN-152XA: Offset Bayonet Nozzle, 18” long with ferrule extension for tubes 4” O.D. ...........................................$485.00 Note: Contact factory if longer Straight or Offset Bayonet Nozzles are needed for your application. Note: When ordering bayonet nozzles or brushes, specify part number and size according to the table (order by tube O.D.). Bayonet nozzle and brush diameters will fit tube I.D. * Call for pricing for 3 1/2" O.D. SAM-3 SERVICE KIT Get your SAM-3 Boiler Cleaning Equipment working like new again with this gear box repair kit. This tune up package includes illustrated instructions as well as all the replacement wear items you will need to get your gearbox running at peak performance. SAM3-SVC-GB-KIT: Sam-3 Service Kit includes, 632 QTY-1, 625 QTY-2, 626 QTY-1, 670 QTY-2, 671 QTY-1, 672 QTY-1, 669 QTY-2, and 1 pint of SAM-3-LUBE ..................................$331.00 20 GOODWAY.COM 1-800-333-7467
